Sony HXR-NX5R Operating Manual Download Page 114

Page: 114 / 148

114

Troubleshooting

If you run into any problems using your camcorder, follow the flow chart below.

• Power sources/LCD screen/Wireless Remote Commander (p. 114)
• Memory cards (p. 116)
• Recording (p. 116)
• Playback (p. 118)
• Connecting to TV (p. 119)
• Copying/Editing/Connecting to other devices (p. 119)
• Connecting to a computer (p. 120)

The power does not turn on or abruptly turns off.

• Attach a charged battery pack to the camcorder (p. 19).
• Use the AC Adaptor to connect the camcorder to a wall outlet (wall socket) (p. 19).
• The temperature of your camcorder is extremely high. Turn off your camcorder and leave it

for a while in a cool place.

The camcorder does not operate even when the power is set to on.

• Disconnect the power source (battery or AC Adaptor), then reconnect it after about 1 minute.
• Select

(OTHERS)

INITIALIZE.

• The temperature of your camcorder is extremely high. Turn off your camcorder and leave it

for a while in a cool place.

The camcorder gets warm.

• Camera body may get warm with use — this is normal.

Check your camcorder, referring to the items on pages 114 to 120.

Disconnect the power source, reconnect the power source after about 1 minute and turn
on your camcorder.

Select

(OTHERS)

INITIALIZE.

This operation will reset the date, time, and area settings.

Consult your Sony dealer or local authorized Sony service facility.

Power sources/LCD screen/Wireless Remote Commander

Summary of Contents for HXR-NX5R





















































































































































Search results

Summary of Contents for HXR-NX5R

Reviews:

Sony HXR-NX5R, Operating Manual, Page: 114 / 148

Search results

Summary of Contents for HXR-NX5R

Reviews: