1-3
HXR-NX30C/NX30E/NX30J/NX30N/NX30P/NX30U
6) Click the [File Update] button in the window.
7) A file selection screen opens. Select the Destination Data file to be added and click the [Open] button.
8) When the file has been successfully added, the following window opens.
9) Check the Destination Ver. window and confirm that the version has been updated.
Destination Ver. window
– ENGLISH –
1-4. PRECAUTION ON REPLACING THE LD-297 BOARD
Angular Velocity Sensor
When you replace to the repairing board, write down the sensitivity displayed on the angular velocity sensor SE7501 (PITCH/YAW).
Start the Adjust Manual in the Adjust Station and execute the “GYRO sensor sensitivity adj”.
Note:
The sensor sensitivity of SE7501 (PITCH/YAW) on LD-297 board is written only repair parts.
SE7501
LD-297 BOARD (SIDE A)
PPP
YYY
G1
G2
PPP: PITCH sensor sensitivity
YYY: YAW sensor sensitivity