Sony HXR-MC2500, Operating Manual

Page: 21 / 112

21
G
e
tti
ng St
art
e
d
Step 4: Adjusting the LCD screen and viewfinder
The LCD screen can be rotated in the range
as illustrated below, allowing a person other
than the camera operator to see the image.
Pull out the LCD panel block to adjust the
position (
1
), and rotate the viewfinder to
the best angle (
2
, maximum of 90
degrees).
If the viewfinder image appears blurred,
turn the viewfinder lens adjustment lever at
the right of the viewfinder until the image is
sharp.
When the picture in the viewfinder is
hard to see
If you cannot see the picture in the
viewfinder clearly under bright
circumstances, use the supplied eyecup. To
attach the eyecup, stretch it slightly and fit
it over the groove of the eyecup attached to
the camcorder. You can attach the eyecup
facing either the right or left side.
b
Notes
• Do not remove the pre-attached eyecup.
Using the LCD screen
Adjusting the viewfinder
180 degrees
(max.)
Open 180
degrees.
90 degrees
(max.)
Lens
adjustment
lever
Eyecup
(supplied)