79
[AE Title]
Enter the AE title.
This item is available when [MWM] is set to [Use].
Up to 16 characters can be entered.
[Retry]
Select whether to retry operations, such as accessing or
searching MWL and confirming communication with the
MWM server.
The default setting is [Use].
[Advanced] appears when [Use] is selected. For details
on the settings, see “To configure the retry interval and
number of retries” (page 79).
To confirm communication with the MWM
server
Confirm whether communication with the MWM server
is enabled.
1
After configuring each setting in the [MWM Server 1]
tab, select [Confirm] for [MWM] and press the ENTER
button.
Communication confirmation starts. An indicator
appears during confirmation.
The results of confirmation appear when the process
is complete.
2
Select [OK], and press the ENTER button.
If proper communication with the MWM server was not
established, refer to the cause displayed on the screen and
resolve the problem.
To configure the retry interval and
number of retries
1
Select [Advanced] for [Retry], and press the ENTER
button.
The [Advanced] settings screen for the retry appears.
2
Configure each setting, select [Apply] and press the
ENTER button.
[Retry Interval (sec)]
Enter a value ranging from 1 to 120 seconds for the
retry interval.
The default setting is 10 seconds.
[Number of Retries]
Enter a value ranging from 1 to 10 for the number of
retries.
The default setting is 10.
[MWM Server 2] Tab
Configure MWM server settings.
[Patient Name Component]
Select the patient name component to be obtained.
The default setting is [1st Component].
[C-Store] Tab
Configure C-Store settings.
[C-Store]
Select whether to use C-Store.
The default setting is [Not Used].
[Confirm] appears when [Use] is selected. Confirm
communication with the C-Store server. For details, see
“To confirm communication with the C-Store server”
(page 79).
[Server Name]
Enter the server name.
This item is available when [C-Store] is set to [Use].
Up to 253 characters can be entered.
[Port No.]
Enter the port number.
This item is available when [C-Store] is set to [Use].
You can enter a value ranging from 1 to 65535 (up to 5
digits).
The default setting is [104].
[AE Title]
Enter the AE title.
This item is available when [C-Store] is set to [Use].
Up to 16 characters can be entered.
[Retry]
Select whether to retry operations, such as confirming
DICOM transmission and confirming communication
with the C-Store server.
The default setting is [Use].
[Advanced] appears when [Use] is selected. For details
on the settings, see “To configure the retry interval and
number of retries” (page 79).
To confirm communication with the
C-Store server
Confirm whether communication with the C-Store server
is enabled.
1
After configuring each setting in the [C-Store] tab,
select [Confirm] for [C-Store] and press the ENTER
button.
Tip
Summary of Contents for HVO-4000MT
Page 117: ......
