70
[Prohibit Remote Control]
Select whether to prohibit control of the unit via the
remote control buttons.
The default setting is [Not Used].
[Prohibit USB/BD/DVD]
Select whether to prohibit transmission to external
storage destinations other than servers.
The default setting is [Not Used].
To configure advanced image list settings
Specify the selection state of recorded data when you
perform copy or print operations in the [Image List]
screen.
1
Select [Advanced] for [Image List Display], and
press the ENTER button.
The [Advanced] settings screen for the image list
display appears.
2
Configure each setting, select [Apply] and press the
ENTER button.
[Save to]
Select the selection state of recorded data when [Save
to] is selected in the operation box.
You can select from [Deselect All], [Select All],
[Video], and [Still].
The default setting is [Deselect All].
[Print]
Select the selection state of recorded data when
[Print] is selected in the operation box.
You can select from [Deselect All] and [Still].
The default setting is [Deselect All].
[General 2] Tab
Configure initial system settings.
[Recovery]
Select whether to return to the recording action that was
being performed when a recovery operation was
executed.
The default setting is [Use].
Recovery of recorded data is the only action performed
when [Not Used] is selected.
[DVI Input Range]
Select the range mode to use for DVI inputs.
You can select from [Limited Range] and [Full Range].
The tonal range for [Limited Range] is 16 to 235, and the
tonal range for [Full Range] is 0 to 255.
The default setting is [Full Range].
[Automatic Pause]
Select whether to automatically pause recording when
there is no input signal.
The default setting is [Not Used].
If you select [Use], recording will pause if there is no
input signal for 10 minutes.
[Mic Plug-In Power]
Select the voltage to use when supplying power to the
microphone from the unit.
You can select from [2.5V], [3.2V], and [4.2V].
The default setting is [2.5V].
[LCD Backlight Adjust]
Select the brightness of the front panel display.
You can select from [25%], [50%], [75%], and [100%].
The default setting is [75%].
[Facility] Tab
Configure initial settings for the facility.
[Facility Name]
Enter up to 32 characters for the facility name.
Use only alphanumeric characters, underscores (_),
hyphens (-), and spaces.
[Display Logo]
Select whether to display a logo in the [MENU] screen.
The default setting is [Not Used].
If you want to set [Display Logo] to [Use], be sure to
import the logo.
To import a logo
Import the logo file you want to display.
1
Copy the logo file onto a USB memory device, and
insert the device into a USB port 1 on the front panel
of the unit.
2
Select [Import], and press the ENTER button.
3
Press the ENTER button when the message that
requests media to be inserted appears.
When import of the logo file is complete, a
notification message will appear.
Summary of Contents for HVO-3300MT
Page 99: ......