Sony HVO-3300MT Instructions For Use Manual Download

Page: 64 / 99

Displaying the [System
Admin Settings] Screen

You can set the initial configurations for various settings
in the [System Admin Settings] screen.
Configurations in the [System Admin Settings] screen
must be performed by the system administrator.
• Language and Time Settings

(page 65)

Configure the display language and the date and time
settings.

• Function Settings

(page 67)

Configure initial settings for recording and general
functions.

• Device Settings

(page 72)

Configure initial settings for connected external
devices.

Configure initial settings for the network and server.

• Doctor List Registration

(page 80)

• Editing Cases

(page 82)

• Auto Delete Settings

(page 84)

Configure settings for the auto delete function.

• DICOM Settings

(page 85)

Configure DICOM settings.

Use the on-screen keyboard to enter text.

For details on use, see “Using the On-Screen Keyboard
(Text Entry)” (page 29).

Press the MENU button.

The [MENU] screen appears.

Select [Settings], and press the ENTER button.

The [Settings] screen appears.

Select [System Admin Settings], and press the
ENTER button.

If password protection is enabled, a password entry
screen will appear.

Press the ENTER button when the system
administrator settings notification screen appears.

The [System Admin Settings] screen appears

Select the settings you want to configure, and press
the ENTER button.

The setting screen for the selected item appears.
The serial number of the unit and the current software
version appear at the bottom left.

About the [Service Menu]

The [Service Menu] is a function reserved for service
personnel.
It cannot be used by general users.

Chapter 5: System Administrator
Settings

Tip

Summary of Contents for HVO-3300MT




































































































Search results

Summary of Contents for HVO-3300MT

Reviews:

Related manuals for HVO-3300MT

Brands by name

Popular brands

Sony HVO-3300MT, Instructions For Use Manual

Search results

Summary of Contents for HVO-3300MT

Reviews:

Related manuals for HVO-3300MT

Brands by name

Popular brands