GB
76
• [MANUAL RATIO: ON] can be set when the camera is in M (manual)
mode.
It may also be available when the camera is not in M mode, if
[MANUAL MODE] in the MENU settings of the flash unit (page 93)
is set to [PASM].
• When [MANUAL MODE] is set to [MANUAL] and the camera is in
M mode, setting [MANUAL RATIO: ON] temporarily displays
[MANUAL RATIO: ON] so long as communication with the camera is
off. When communication with the camera starts, the display changes
to [TTL RATIO: ON].
• The zoom indicator is not shown when [RATIO: OFF] is set.
Off-camera flash setting:
Set your flash to WL RMT mode. If using this flash unit as an off-camera
flash, see page 71. (After setting to WL RMT mode, set the wireless remote
setting indicator to [TTL REMOTE] or [MANUAL REMOTE].) If using a
different flash, refer to the operating instructions supplied with that flash.
2
Attach the controller to the camera, and turn on the
power of the camera, controller, off-camera flash.
3
Set up the camera with the controller and the
off-camera flash.
• See page 64 for details.
4
Make sure that the controller and the flash unit are fully
charged.
• When the flash unit is fully charged in the wireless flash mode, the AF
illuminator on the front blinks, and the TEST button is lit in amber.
Summary of Contents for HVL-F60M
Page 105: ...Additional Information 105GB ...
