To use the function, select the wireless (WL) flash mode on the camera and select [ON] for [
WITH RELEASE] on the MENU screen on this
flash unit. While [ON] is selected, you can change the flash mode of this flash unit.
For selecting the flash mode on the camera, refer to the operating instructions supplied with the camera.
Notes on remote release photography
Both the commander unit and the receiver unit must support remote release photography.
To perform remote release photography, you need to connect this flash unit specified as the receiver unit to a camera with the Multi
Terminal Connecting Cable.
To use the remote release sync flash function on this flash unit specified as the receiver unit, you need to change the setting option for [
WITH RELEASE] to [ON] on the MENU screen on the receiver unit and attach the receiver unit to the camera with the clip-on connection.
The shutter release timing depends on the settings of an individual camera. In addition, the shutter release of the camera with the receiver
unit connected lags behind the shutter release of the camera with the commander unit attached.
On the camera with the receiver unit connected, it is recommended that you select the manual focus mode for the camera or the lens and
adjust the focus manually. If the auto focus fails on the camera, the release of the shutter may also fail.
If you use the remote release sync flash function to control multiple flash units to fire at the same time, it may result in improper exposure or
uneven brightness of the photographed image.
Hint
You can release the shutter of the camera with the receiver unit connected by pressing the center button on the flash unit specified as the commander unit.
Related Topic
Pairing with a radio wireless commander/receiver <for radio wireless flash photography>
4-735-263-12(1) Copyright 2018 Sony Corporation
52
