Ad
v
a
n
c
ed
O
p
er
at
io
n
s
57
GB
Setting wireless flash by flash only
Once you have performed the wireless flash setup in step [A], if you continue to use
the same camera and flash combination without changing the wireless channel then
you can also set the flash and camera separately to wireless.
Camera setting:
Set the camera to the wireless flash mode.
For details, refer to the operating instructions supplied with your camera.
Flash setting:
1
Press the TTL/M button to display
or
.
• When selecting
, the flash unit fires with the power level to be
set.
2
Press the MODE button repeatedly to display [WL], and
then press the Fn button.
3
Press the
g
or
G
button to make [RMT] or [RMT2] blink,
and then press the Fn button.
• Make sure that the wireless channel of the off-camera flash is set to the
same channel as the controller.
For details on setting the wireless channel, see “Custom settings” (page
).
