background image

SERVICE MANUAL

COMPACT DISC DECK

MICROFILM

SPECIFICATIONS

HTC-VX500

E Model

This stereo system is equipped with the Dolby B-
type noise reduction system.
* Manufactured under license from Dolby
 Laboratories Licensing Corporation.
DOLBY, the double-D symbol 

;

 and “PRO LOGIC”

are trademarks of Dolby Laboratories Licensing
Corporation.

Model Name Using Similar Mechanism

HTC-V5550

CD

CD Mechanism Type

CDM38-5BD24

Section

Base Unit Type

BU-5BD24

Optical Pick-up Name

KSS-213BA/F-NP

Tape deck

Model Name Using Similar Mechanism

HTC-V5550

Section

Tape Transport Mechanism Type

TCM-230AWR2

TCM-230PWR2

• This set is the deck and Video CD

section in MHC-VX500/VX700AV.

Video section

Inputs

AV INPUT VIDEO (phono jack):
1Vp-p, 75 

VIDEO IN (phono jack)
1Vp-p, 75 

Outputs

MONITOR OUT (phono jack):
1Vp-p, 75 

VIDEO OUT (phono jack)
1Vp-p, 75 

S-VIDEO (4-pin/mini-DIN jack):
Y: 1Vp-p, unbalanced, sync negative
C: 0.286Vp-p, load impedance 75 

VIDEO CD/CD player section

System

Compact disc, digital audio and video
system

Laser

Semiconductor laser (

λ

=780nm)

Emission duradon: continuous

Laser output

Max. 44.6µW*
*This output is the value measured at a
diatance of 200 mm from the objective
lens surface on the Optical Pick-up Block
with 7 mm aperture.

Frequency response

20 Hz – 20 kHz (±1 dB)

Wavelength

780 – 790 nm

Signal to noise ratio

More than 90 dB

Dynamic range

More than 90 dB

Video Color System format

NTSC, PAL

CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength

600 nm

Output Level

–18 dBm

Tape player section

Recording system

4-track 2-channel stereo

Frequency response

40 – 13,000 Hz (±3 dB),

(DOLBY NR OFF)

using Sony TYPE
cassette
40 – 14,000 Hz (±3 dB),
using Sony TYPE
cassette

General

Dimensions (w/h/d)

Approx. 288 

×

 205 

×

 360 mm

Mass

Approx. 4.6 kg

Design and specifications are subject to change without notice.

Summary of Contents for HTC-VX500

































































Reviews: