Ampl
ifier O
p
e
ration
masterpage:Right
lename[E:\SEM_Janet\Revision_HT-
SL900W\J9040000_4254829121SL900WGB\4254829121\GB04BSC_HT-SL900W-CEL.fm]
25
GB
model name1[HT-SL900W]
[4-254-829-
12
(1)]
A
;
DIGITAL:
Lights up when the receiver is
decoding signals recorded in the Dolby Digital
format.
B
DTS:
Lights up when DTS signals are input.
C
SW:
Lights up when the audio signal is output
from the SUB WOOFER jack.
D
Playback channel indicators:
The letters
(L, C, R, etc.) indicate the channels being
played back. The boxes around the letters vary
to show how the receiver downmixes the
source sound.
L (Front Left), R (Front Right), C (Center
(monaural)), SL (Surround Left), SR
(Surround Right), S (Surround (monaural or
the surround components obtained by Pro
Logic processing))
Example:
Recording format (Front /Surround): 3/2
Sound Field: A.F.D. AUTO
E
Tuner indicators:
Lights up when using the
receiver to tune in radio stations, etc. See
pages 20–24 for tuner operations.
F
D.RANGE:
Lights up when dynamic range
compression is activated (page 29).
G
COAX:
Lights up when the source signal is a
digital signal being input through the COAX
terminal.
H
OPT:
Lights up when the source signal is a
digital signal being input through the OPT
terminal.
I
LFE:
Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
J
;
PRO LOGIC II:
“
;
PRO LOGIC” lights
up when the receiver applies Pro Logic
processing to 2 channel signals in order to
output the center and surround channel
signals. “
;
PRO LOGIC II” lights up when
the Pro Logic II Movie/Music decoder is
activated.
Note
Dolby Pro Logic and Dolby Pro Logic II
decoding do not function for DTS format signals.
About the indications in the display
MEMORY
L
C
R
SL
S
SR
SW
L F E
ST
D.RANGE
MONO
RDS OPT COAX
DIGITAL
;
PRO LOGIC II
DTS
;
9
q;
2
1
4
3
5
6
7
8
L
C
R
SL
SR
GB01COV_HT-SL900W-CEL.book Page 25 Monday, May 24, 2004 8:22 AM