Sony HT-SF370 Operating Instructions Manual Download

Page: 30 / 76

Turn on the component and
start playback.

Press MASTER VOL +/– to
adjust the volume.

You can also use MASTER VOLUME on
the receiver.

To activate the muting function

Press MUTING. “MUTING” lights up and
“MUTING ON” appears on the display for a
few seconds.
The muting function will be canceled when
you do the following.
• Press MUTING

again.

• Increase the volume.
• Turn off the receiver.

To avoid damaging your
speakers

Before you turn off the receiver, be sure to turn
down the volume level.

Enjoying sound/images
from the components
connected to the receiver

Selected input

[Display]

Components that can
be played back

[TV]

TV, etc., connected to the
TV jack

VIDEO

[VIDEO]

DVD player, DVD
recorder, etc., connected
to the VIDEO jack

SA-CD/CD

[SA-CD/CD]

Super Audio CD player,
CD player, etc.,
connected to the SA-CD/
CD jack

DMPORT

[DMPORT]

DIGITAL MEDIA PORT
adapter connected to the
DMPORT jack

TUNER

[FM or AM band]

Built-in radio tuner

DVD

SAT/

CATV

VIDEO

SA-CD/

DMPORT

TUNER

MENU

Input
buttons

SOUND
FIELD +/–

TV VOL
+/–

Summary of Contents for HT-SF370













































































Search results

Summary of Contents for HT-SF370

Reviews:

Related manuals for HT-SF370

Brands by name

Popular brands

Sony HT-SF370, Operating Instructions Manual

Search results

Summary of Contents for HT-SF370

Reviews:

Related manuals for HT-SF370

Brands by name

Popular brands