Sony HT-SD35, Operating Instructions Manual

Page: 19 / 80

19
US
You can adjust the sound with the buttons on the remote control.
Tip
AUDIO does not work while the BLUETOOTH indicator is lit.
Adjusting the Sound
Function
name Button Function
Night mode You can enjoy clear sound with low volume at midnight.
• On: The MULTI CH indicator flashes twice.
• Off: The MULTI CH indicator flashes once.
Note
When you turn the Sound Bar off, the night mode is set to off
automatically.
Voice mode You can make dialogs clearer.
• On: The MULTI CH indicator flashes twice.
• Off: The MULTI CH indicator flashes once.
Audio DRC
Press and
hold for 5
seconds
You can compress the dynamic range of the audio signal
(range between the maximum and minimum volume) and
sound with low volume is easy to hear. This function works only
when playing the Dolby Digital signal.
• On: The BLUETOOTH indicator flashes twice.
• Off: The BLUETOOTH indicator flashes once.
Multiplex
broadcast
sound You can enjoy multiplex broadcast sounds when the Sound Bar
receives a Dolby Digital multiplex broadcast signal. The setting
changes cyclically in the order of Main

Sub

Main/Sub.
• Main: The MULTI CH indicator flashes once.
• Sub: The BLUETOOTH indicator flashes once.
• Main/Sub: Main sound is output from the left speaker and
sub sound is output from the right speaker.
The MULTI CH and BLUETOOTH indicators flash once.