background image

38

GB

Precautions

On safety

• Should any solid object or liquid fall into 

the Sound Bar, unplug the Sound Bar and 
have it checked by qualified personnel 
before operating it any further.

• Do not climb on the Sound Bar, as you 

may fall down and injure yourself, or 
Sound Bar damage may result.

On power sources

• Before operating the Sound Bar, check 

that the operating voltage is identical to 
your local power supply. The operating 
voltage is indicated on the nameplate on 
the bottom of the Bar Speaker.

• If you are not going to use the Sound Bar 

for a long time, be sure to disconnect the 
Sound Bar from the wall outlet (mains). To 
disconnect the AC power cord (mains 
lead), grasp the plug itself; never pull the 
cord.

• One blade of the plug is wider than the 

other for the purpose of safety and will fit 
into the wall outlet (mains) only one way. 
If you are unable to insert the plug fully 
into the outlet, contact your dealer.

• AC power cord (mains lead) must be 

changed only at a qualified service shop.

On heat buildup

Although the Sound Bar heats up during 
operation, this is not a malfunction.
If you continuously use this Sound Bar at 
high volume, the Sound Bar temperature at 
the rear and bottom rises considerably. To 
avoid burning yourself, do not touch the 
Sound Bar.

On placement

• Place the Sound Bar in a location with 

adequate ventilation to prevent heat 
buildup and prolong the life of the Sound 
Bar.

• Do not place the Sound Bar near heat 

sources or in a place subject to direct 

sunlight, excessive dust, or mechanical 
shock.

• Do not place anything on the top of the 

Bar Speaker.

• If the Sound Bar is being used in 

combination with a TV, VCR, or tape deck, 
noise may result and picture quality may 
suffer. In such a case, place the Sound Bar 
away from the TV, VCR, or tape deck.

• Use caution when placing the Sound Bar 

on a surface that has been specially 
treated (with wax, oil, polish, etc.), as 
staining or discoloration of the surface 
may result.

• Take care to avoid any possible injury 

from the corners of the Bar Speaker.

On operation

Before connecting other equipment, be 
sure to turn off and unplug the Sound Bar.

If you encounter color irregularity 
on a nearby TV screen

Color irregularities may be observed on 
certain types of TV.
• If color irregularity is observed...

Turn off the TV, then turn it on again after 
15 to 30 minutes.

• If color irregularity is observed again...

Place the Sound Bar further away from 
the TV.

On cleaning

Clean the Sound Bar with a soft, dry cloth. 
Do not use any type of abrasive pad, 
scouring powder, or solvent such as 
alcohol or benzine.

If you have any question or problem 
concerning your Sound Bar, please consult 
your nearest Sony dealer.

Summary of Contents for HT-S350









































Reviews: