Sony HT-M2, Operating Instructions Manual

Page: 40 / 44

40 GB
PROTECT
Irregular current is output to the speakers, or
the receiver is covered and ventilation holes
are blocked. The receiver will automatically
turn off after a few seconds. Remove the
object covering the upper panel of the
receiver, check the speaker connection, and
turn on the power again.
USB FAIL
An over current from the (USB) port
was detected. The receiver will
automatically turn off after a few seconds.
Check the USB device, then unplug it and
turn on the power again.
Reference sections
Specifications
Amplifier section
Power Output
Latin America and Argentina models
Stereo mode output (rated) (6 ohms, 1 kHz,
THD 1%)
104 W + 104 W
1)
Surround mode output
2)
(reference) (6 ohms,
1 kHz, THD 30%)
RMS output
FRONT: 220 W per channel
1)
SURROUND: 220 W per channel
1)
Surround mode
2)
(reference) (6 ohms, 100 Hz,
THD 30%)
SUBWOOFER:
220 W per channel
1)
South Africa model
Stereo mode output (rated) (6 ohms, 1 kHz,
THD 1%)
104 W + 104 W
1)
Surround mode output
2)
(reference) (6 ohms,
1 kHz, THD 10%)
RMS output
FRONT: 165 W per channel
1)
SURROUND: 165 W per channel
1)
Surround mode
2)
(reference) (6 ohms, 100 Hz,
THD 10%)
SUBWOOFER:
170 W per channel
1)
1)
Measured under the following conditions:
2)
Reference power output for front, surround
speakers and subwoofers. Depending on the sound
field settings and the source, there may be no
sound output.
Inputs
Analog Sensitivity: 800 mV/
50 kilohms
Digital (Coaxial) Impedance: 75 ohms
Outputs (Analog)
AUDIO OUT Voltage: 800 mV/
1 kilohm
Tone
Gain levels ±6 dB, 1 dB step
Reproduction frequency range:
28 Hz – 20,000 Hz
FM tuner section
Tuning range 87.5 MHz – 108.0 MHz
Antenna (aerial) FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
Clearing the memory
To clear See
All memorized settings page 19
Customized sound fields page 31
Area Power requirements
South Africa, Latin
America 240 V AC, 50 Hz
Argentina 230 V AC, 50 Hz