27
GB
G
e
tti
n
g
Started
• You may install your speaker at different angles
to achieve optimum sound quality (page 25).
• Use screws that are suitable for the wall material
and strength. As a plaster board wall is
especially fragile, attach the screws securely to
a beam and fasten them to the wall. Install the
speakers on a vertical and flat wall where
reinforcement is applied.
• Contact a screw shop or installer regarding the
wall material or screws to be used.
• Sony is not responsible for accident or damage
caused by improper installation, insufficient
wall strength or improper screw installation,
natural calamity, etc.
Step 2: Connecting the
System
Do not connect the AC power cord (mains
lead) of the main unit to a wall outlet
(mains) until all the other connections are
made.
When you connect other equipment with a
volume control, turn down the volume of the
equipment to a level where sound is not distorted.
Connect the speaker cords to match the
color of the SPEAKERS jacks of the main
unit. Be sure to insert the speaker connector
until it clicks.
Be sure to connect the speaker cords to the front
and surround speakers.
Notes
Note
Connecting the
speakers
Note
Gray
(Surround right
speaker (R))
Purple
(Subwoofer)
White
(Front left
speaker (L))
Red
(Front right
speaker (R))
Green
(Center
speaker)
Blue
(Surround left
speaker (L))
