25
GB
G
e
tti
n
g
Started
• For [Standard] speaker layout, be sure to attach
the supplied foot pads (page 25) on the front and
center speakers. For [All Front] speaker layout,
be sure to attach the supplied foot pads on the
front, center and surround speakers.
• Be sure to select the speakers layout setting
(page 48) according to your speakers
placement.
• Use caution when placing the speakers and/or
speaker stands attached to the speakers on a
specially treated (waxed, oiled, polished, etc.)
floor, as staining or discoloration may result.
• Do not lean or hang on a speaker, as it may fall
down.
• The speakers of this system are not magnetically
shielded. This may result in color irregularity
when they are placed near a CRT TV or
projector.
Speakers can be placed on a flat surface or
installed on walls (page 25). You may
position the speakers at different angles to
achieve optimum sound quality.
Before you install the front speakers, center
speaker and surround speakers, be sure to
attach the supplied foot pads as shown in
the illustration below. This prevents
vibration or movement and reduce
scratches.
You can attach the foot pads on either side of the
two mirrored surface.
You can install your speakers on the wall.
1
Prepare screws (not supplied)
that are suitable for the hook on
the back of each speaker. See
the illustrations below.
2
Fasten the screws to the wall,
then hang the speaker on the
screws.
Notes
Example of multi angle
speaker configuration
Installing the speakers
on a flat surface
Note
Installing the speakers
on the wall
3 mm
3 mm
3 mm
3 mm
4 mm (3/16 in)
more than 25 mm (1 in)
