Sony HT-GT1, Operating Instructions Manual

Page: 38 / 52

HT-GT1.GB.4-542-874- 12 (1)
38
GB
To check the timer setting or
activate the timer again
1
Press TIMER MENU.
“TIMER SEL” flashes on the display.
2
Press .
3
Press

/

repeatedly to select
“PLAY SEL,” then press .
To cancel the timer
Repeat the same procedure as “To
check the timer setting or activate
the timer again” and select “OFF” in
step 3, then press .
Notes
ˎ
The system turns on before the preset
time. If the system is already turned
on at the preset time or if “STANDBY”
flashes on the display, the Play Timer
will not be activated.
ˎ
Do not operate the system from the
time the system turns on until the
playback starts.
Using optional
equipment
1
Press VOL − repeatedly until
“VOL MIN” appears on the
display.
2
Connect an optional equipment
to AUDIO IN L/R jacks.
3
Press FU/– repeatedly
to select the audio in function.
4
Start playing the connected
equipment.
5
Press VOL + repeatedly to adjust
the volume.
Note
The system may enter standby mode
automatically if the volume level of the
connected equipment is too low. Adjust
the volume level of the equipment. If you
turn off automatic standby function, see
“Setting the automatic standby function”
(page 39).