manualshive.com logo in svg

Sony HT-GT1, Operating Instructions Manual

Share
Download
Sony HT-GT1 Operating Instructions Manual Download Page 41

41

GB

HT-GT1.GB.4-542-874-

12

(1)

Additional Inf

orma

tion

General

The system has entered standby 
mode.

 

ˎ

This is not a malfunction. The 
system enters standby mode 
automatically in about 15 minutes 
when there is no operation and no 
audio signal is detected. 
See “Setting the automatic 
standby function”(page 39).

The clock or timer setting is 
canceled.

 

ˎ

The power cord is disconnected 
or a power failure occurred. Set 
the clock (page 20) and timer 
(page 37) again.

There is no sound.

 

ˎ

Adjust the volume.

 

ˎ

Check the connection of the 
optional equipment, if any 
(page 16).

 

ˎ

Turn on the connected equipment.

No TV sound is heard from the 
system.

 

ˎ

This system supports 2-channel 
Linear PCM formats only. Check 
the audio output setting on the 
TV and change it to PCM output 
mode if automatic mode is 
selected.

 

ˎ

Check that the speaker output 
setting on the TV is set to use 
external speakers.

There is severe hum or noise.

 

ˎ

Move the system away from 
sources of noise.

 

ˎ

Connect the system to a different 
wall outlet.

 

ˎ

Install a noise filter (commercially 
available) to the power cord.

 

ˎ

Turn off surrounding electrical 
equipment.

The timer does not function.

 

ˎ

Check the timer setting and set 
the correct time (page 37).

 

ˎ

Cancel the Sleep Timer function 
(page 37).

The remote control does not 
function.

 

ˎ

Remove the obstacles between 
the remote control and the 
subwoofer.

 

ˎ

Move the remote control closer to 
the subwoofer.

 

ˎ

Point the remote control at the 
subwoofer’s remote control 
sensor.

 

ˎ

Replace the batteries (R03/size 
AAA).

 

ˎ

Move the subwoofer away from 
the fluorescent light.

There is acoustic feedback.

 

ˎ

Reduce the volume.

“CHILD” and “LOCK” appear when 
you press any button on the 
subwoofer.

 

ˎ

Set the Child Lock function to off 
(page 39).

A clicking sound is heard when 
turning the power on.

 

ˎ

This is the operating sound and it 
occurs when the power is turned 
on or off, for example. This is not a 
malfunction.

Summary of Contents for HT-GT1





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands