Sony HT-DDW870 Operating Instructions Manual Download

Page: 22 / 60

masterpage:Left

lename[D:\SONY SEM 2005\Revision Data\HT-

DDW870\J9050000_2549734151DDW870UCA\2549734151\GB04BSC_HT-DDW870-UCA.fm]

model name1[HT-DDW870]

[2-549-734-

(1)]

Press input buttons to select the input.

The selected input appears in the display.

Turn on the component and start
playback.

Note

If you select any video components, set the TV’s
video input to match the component you selected.

Turn MASTER VOLUME –/+ to adjust
the volume.

Note

To avoid damaging your speakers, make sure that
you turn down the volume before you turn off the
receiver.

To mute the sound

Press MUTING on the remote.
The muting function will be canceled when you
do the following.
• Press MUTING on the remote again.
• Turn the power off.
• Increase the volume.

To use the headphones

Connect the headphones to the PHONES jack.
• When the headphones are connected, speaker

output is automatically canceled and the
“SP A” and “SP B” indications in the display
turn off .

• When the headphones are connected, you can

select only the following sound fields
(page 33).

– HP 2CH (HEADPHONE 2CH)

– HP THEA (HEADPHONE THEATER)

Amplifier Operation

Selecting the component

To select the

Press

VCR

VIDEO 1 or
VIDEO 2

Satellite tuner

VIDEO 2

Camcorder or video game VIDEO 3

DVD player

DVD

MD or tape deck

MD/TAPE

Super Audio CD or
CD player

SA-CD/CD

Built-in tuner (FM)

Built-in tuner (AM)

GB01COV_HT-DDW870-UCA.book Page 22 Monday, June 20, 2005 4:43 PM

Summary of Contents for HT-DDW870





























































Search results

Summary of Contents for HT-DDW870

Reviews:

Related manuals for HT-DDW870

Brands by name

Popular brands

Sony HT-DDW870, Operating Instructions Manual

Search results

Summary of Contents for HT-DDW870

Reviews:

Related manuals for HT-DDW870

Brands by name

Popular brands