Sony HT-DDW685 Operating Instructions Manual Download Page 24

Page: 24 / 64

Tips

• You can also fix the optimizer microphone to a

tripod (not supplied) and place the tripod at your
listening position.

• Be sure to remove any obstacles in the path

between the optimizer microphone and the
speakers.

• When you face the speaker towards the optimizer

microphone, you will get a more accurate
measurement.

Press AUTO CAL.

The following appears on the display.
A.CAL [5]

A.CAL [4]

A.CAL [3]

A.CAL [2]

A.CAL [1]

The measurement process will take a few
minutes to complete.
The table below shows the display when
measurement starts.

* The corresponding speaker indicator lights up in

the display during measurement.

When measurement ends, “COMPLETE”
appears on the display and the settings are
registered.

After you have finished

Disconnect the optimizer microphone from the
receiver.

Notes

• Auto Calibration cannot detect the sub woofer.

Therefore, the sub woofer settings will be
maintained.

• You cannot select Auto Calibration when the

headphone is connected.

Tips

• When Auto Calibration starts:

– Stand some distance away from the speakers and

the listening position to avoid measurement
failure. This is because test signals are output
from the speakers during measurement.

– Avoid making noise to get a more accurate

measurement.

• The Auto Calibration function will be canceled

when you do the following during the
measurement process:
– Press

, input buttons or MUTING.

– Change the volume level.
– Press AUTO CAL again.

Performing Auto Calibration

0/10

ENTER

SYSTEM STANDBY

TV INPUT

SLEEP

AUTO

CAL

?/1

VIDEO 1

VIDEO 2

VIDEO 3

DVD

2CH

A.F.D.

RETURN/EXIT

MENU

MOVIE

MUSIC

MEMORY DVD MENU

CLEAR

TOOLS

DISPLAY

MUTING

TV VOL

MASTER VOL

FM MODE

D.TUNING

D.SKIP

AMP MENU

SAT

SA-CD/CD TUNER

?/1

>10/

Input
buttons

switch

MUTING

MASTER
VOL +/–

AUTO
CAL

Measurement for

Display

Environment noise level

NOISE.CHK

Speaker connection

MEASURE and SP
DET. appears
alternately*

Speaker level

MEASURE and
GAIN appears
alternately*

Speaker distance

MEASURE and
DISTANCE appears
alternately*

Summary of Contents for HT-DDW685

































































Search results

Summary of Contents for HT-DDW685

Reviews:

Related manuals for HT-DDW685

Brands by name

Popular brands

Sony HT-DDW685, Operating Instructions Manual

Search results

Summary of Contents for HT-DDW685

Reviews:

Related manuals for HT-DDW685

Brands by name

Popular brands