Sony HT-CT60BT, Operating Instructions Manual

Page: 26 / 88

26
US
Specifications
Formats supported by this system
Digital input formats supported by
this system are as follows.
Sound Bar
Amplifier section
U.S. models:
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R:
With 4 ohms loads, both channels
driven, from 230 - 20,000 Hz; rated
6 Watts per channel minimum RMS
power, with no more than 1 % total
harmonic distortion from 250
milliwatts to rated output.
POWER OUTPUT (reference)
Front L/Front R: 15 W
(per channel at 4 ohms, 1 kHz)
Canadian models:
POWER OUTPUT (rated)
Front L + Front R: 7 W + 7 W
(at 4 ohms, 1 kHz, 1 % THD)
POWER OUTPUT (reference)
Front L/Front R: 15 W
(per channel at 4 ohms, 1 kHz)
Inputs
ANALOG
OPTICAL
COAXIAL
BLUETOOTH section
Communication system
BLUETOOTH Specification
version 2.1 +
EDR (Enhanced Data Rate)
Output
BLUETOOTH Specification Power
Class 2
Maximum communication range
Line of sight approx. 10 m
*1
Frequency band
2.4 GHz band (2.4000 GHz -
2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread
Spectrum)
Compatible BLUETOOTH profiles
*2
A2DP (Advanced Audio Distribution
Profile)
Supported Codecs
*3
SBC
*4
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling
frequency 44.1 kHz)
*1
The actual range will vary depending
on factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone, reception sensitivity,
operating system, software
application, etc.
*2
BLUETOOTH standard profiles
indicate the purpose of BLUETOOTH
communication between devices.
*3
Codec: Audio signal compression
and conversion format
*4
Subband Codec
Front speaker unit
Speaker system
2-way speaker system, Acoustic
Suspension
Speaker unit
Woofer: 25 mm × 120 mm (1 in ×
4 3/4 in)
Tweeter: 38 mm (1 1/2 in)
cone type
Rated impedance
4 ohms
Power requirements
120 V AC, 60 Hz
Power consumption
On: 20 W
Standby mode: 0.5 W or less
Format Supported/Not
supported
Dolby Digital

Linear PCM 2ch 48 kHz
or less
