16
US
Using the setup display
You can set the following items with the menu.
Your settings are retained even if you disconnect the AC power cord (mains lead).
1
Press MENU to turn on the menu in the top panel display.
2
Press BACK/
/
/ENTER repeatedly to select the item and press ENTER to
select the setting you want.
3
Press MENU to turn off the menu.
The default settings are underlined.
Settings and Adjustments
Menu list
Menu items
Function
“LVL >”
(Level)
“ATT”
(Attenuation
settings - Analog)
Distortion may occur when you listen to a device connected
to the ANALOG IN jack. You can prevent distortion by
attenuating the input level on the system.
• “ON”: Attenuates the input level. The output level will
decrease at this setting.
• “OFF”: Normal input level.
“DRC”
(Dynamic range
control)
Useful for enjoying movies at low sound volume. DRC
applies to Dolby Digital sources.
• “ON”: Compresses sound in accordance with the
information contained in the content.
• “OFF”: Sound is not compressed.
“SPK >”
(Speaker)
“PLACE”
(Speaker
placement)
• “STDRD”: Select this setting if you install the Bar Speaker
in standard position.
• “WALL”: Select this setting if you mount the Bar Speaker
on a wall (page 20).
“AUD >”
(Audio)
“DUAL”
(Dual mono)
You can enjoy multiplex broadcast sound when the system
receives a Dolby Digital multiplex broadcast signal.
• “M/S”: Mixed sound of both the main and sub languages
will be output.
• “MAIN”: Sound of the main language will be output.
• “SUB”: Sound of the sub language will be output.
“TV AU”
(TV audio)
• “AUTO”: Select this setting when the system is connected
to an HDMI (ARC) jack of a TV with an HDMI cable.
• “OPT”: Select this setting when the system is connected to
a TV with the optical digital cable.
“EFCT”
(Sound effect)
• “ON”: The sound of the selected sound field is played. It is
recommended to use this setting.
• “OFF”: The input source is down-mixed for 2 channels.
“STRM”
(Stream)
Shows the current audio stream information.
See page 28 on the supported audio formats.
