27
US
A
dvanced Setting
s
SET BT
BT.STBY
(BT STANDBY)
When the system has pairing information, the system is in
BLUETOOTH standby mode even when it is turned off.
ON: BLUETOOTH standby mode is enabled. The
illumination LED flashes in blue slowly when the system is
turned off.
OFF: BLUETOOTH standby mode is disabled.
If the system does not have pairing information,
BLUETOOTH standby mode cannot be set.
During BLUETOOTH standby mode, standby power
consumption increases.
BT.VOL
(BT VOLUME
CONTROL)
You can set how this system operates when the volume is
adjusted via a BLUETOOTH device.
ON: Allows you to adjust the volume of the system via a
BLUETOOTH device. The range of volume turned up or
down by one operation is limited to within 5 steps of the
volume level of this system.
OFF: The volume cannot be adjusted via a BLUETOOTH
device.
DIRECT: The volume of the system is set as it is adjusted via
a BLUETOOTH device.
In the case of “DIRECT,” the system may output sound at a
large volume, depending on a BLUETOOTH device.
SYSTEM
A. STBY
(AUTO STANDBY)
You can reduce power consumption. The Sound Bar enters
standby mode automatically when you do not operate the
Sound Bar for about 20 minutes and the Sound Bar is not
receiving an input signal.
ON: Turns on the “A. STBY” function.
OFF: Turns off the function.
IR REP
If the remote control of a TV cannot control the TV, the Sound
Bar can relay the remote control signal to the TV to control
the TV.
ON: The relay function is enabled.
OFF: The relay function is disabled.
VERSION
The current firmware version information appears on the
front panel display.
WS
LINK
Use this item when you want to enable the wireless
transmission (page 28).
Menu items
Function
Notes
Note
