![Sony HST-SE581 Operating Instructions Manual Download Page 21](http://html.mh-extra.com/html/sony/hst-se581/hst-se581_operating-instructions-manual_397099021.webp)
21
EN
4
Select the side from which to start
dubbing.
Press
·
to record from the front side.
Press
ª
to record from the reverse side.
5
Press PAUSE
P
to start dubbing.
To stop normal-speed dubbing
Press
p
on deck B.
To stop high-speed dubbing
Press
p
on both decks.
Tips
• During high-speed dubbing, only
p
is operative.
• If the original tape was recorded with Dolby NR
B, dubbing is automatically performed with Dolby
NR B. If, however, you want to monitor the sound
during normal-speed dubbing, set DOLBY NR to
B.
Note
If a TV set is placed near the system, noise may
occur during high-speed dubbing. In that case, turn
the TV set off or move it away from the system.
Dubbing only specific
portions
You can skip unwanted portions during
normal-speed dubbing.
1
Press
p
on deck A at the portion you want
to skip.
Deck B changes to recording pause.
2
Locate the point you want to resume
recording on deck A, then stop the tape.
3
Press PAUSE
P
to resume dubbing.
POWER
P
r
R
0
)
p
ª
·
§
0
)
p
ª
·
§
3
3
2
Inserting a blank
space during
recording
–– Record Muting
You can insert a blank space of 4 seconds
between each track or erase unwanted
portions on a tape.
1
Start recording.
2
Press REC MUTING
R
at the point
you want to insert a blank space.
“REC” flashes in the display and a blank
space is recorded on the tape.
After 4 seconds,
P
lights up and the tape
deck changes to recording pause.
3
Press PAUSE
P
or
·
to resume
recording.
While dubbing at normal speed, press
PAUSE
P
to resume recording.
Tip
To insert a blank space longer than 4 seconds, hold
down REC MUTING
R
as long as you want. After
4 seconds, “REC” flashes faster.
When you release REC MUTING
R
,
P
indicator
lights up and the tape deck changes to recording
pause.
Press PAUSE
P
to resume recording.