Sony HKSR-9003, Operation Manual

Page: 43 / 177

Basic Settings with the Subdisplay 43
Chap
ter
3
Ba
s
ic
Ad
jus
tme
nt
s
an
d Set
tings
You can also use the <SHUTTER> page of the
Camera >USER (PAINT) menu to change a
registered shutter step value.
See “Detailed Shutter Settings” (page 66) for more
information about the <SHUTTER> page.
STEP 1-8
On each line, the [deg] column displays a
registered shutter angle. The [sec] column
displays the corresponding shutter speed value,
converted according to the currently selected
frame rate.
ADD
Use this to register new shutter step values.
Display the shutter angle you wish to register, and
then press the MENU SEL/ENTER dial. You can
select angle values in the range from 360.0 to 4.3
degrees. Shutter step values are sorted
automatically in descending order. If eight values
have been already registered, the message
“STEPS FUL” appears, and a new value cannot
be added. In this case, use DEL (see the following
section) to delete an unneeded value beforehand.
DEL
Use this to delete registered shutter step values.
When the pointer is positioned at DEL, an
asterisk (*) appears to the left of STEP 1.
Move the asterisk to the left of the value you wish
to delete, and then press the MENU SEL/ENTER
dial. That value is deleted, and the items after the
deleted one are automatically renumbered.
During step selection operations, the unit displays
registered values only. If you rarely use one of the
registered values, you can operate more quickly
by deleting it.
You can leave up to seven of the STEP numbers
(numbers 2 to 8) unregistered.
PRESET
Resets all step shutter values to the factory
defaults.
On the subdisplay, you can select the video
format from among the eight registered formats.
When the unit is shipped from the factory, the
following eight formats are registered under
numbers 1 to 8.
Video format selection page
The first line display the currently selected
format.
When you switch to data modification mode, an
alternative format appears on the second line.
This allows you to select the desired format from
among the registered formats.
<SHUTTER ASSIGN> page
Selecting the Video Formats
No. Registered
format Indication on the
subdisplay
1 (default) 23.98P 4:2:2 _23.98P 422
2 24P 4:2:2 _24P 422
3 25P 4:2:2 _25P 422
4 29.07P 4:2:2 _29.97P 422
5 50P 4:2:2 _50P 422
6 59.94P 4:2:2 _59.94P 422
7 50I 4:2:2 _50I 422
8 59.94I 4:2:2 _59.94I 422
Example: Delete 90.0 at step 6