1-9 (E)
HKSR-5804
12. Arrange the coaxial cables with the cable clamps.
Push the cables between the boards so that the cables
do not lie on the upper edge of the boards.
13. Confirm that the each bard is securely inserted.
14. Reattach the upper lid (rear) assembly and then tighten
the two fixing screws.
15. Reattach the upper lid (front) assembly and then
tighten the fixing screw. Slide the two knobs each to
the outside.
16. Confirm that the HKSR-5804 has been identified by
the MAINTENANCE INFORMATION menu. (Refer
to Section 1-4.)
EXIT
OPTION BOARD INFORMATION
HKSR-5001 Board – – – – – – – – –
HKSR-5802 Board – – – – – – – – –
HKSR-5803 Board – – – – – – – – –
HKSR-5804 Board I N S T A L L E D
OPTION INFO
FUNC
INFO
DIAG
F1
F2
F3
F4
ALT
F5
F6
F7
F8
F9
F10
DIAG
F1
F2
F3
F4
ALT
F5
F6
F7
F8
F9
F10
ROM
VER
ERR
LOG
OPTION
INF
MAINTE
EXEC
EXIT
OPERATION 1105HOURS[ 1105H]
DRUM RUNNING 238HOURS[ 238H]
TAPE HOURS 153HOURS[ 153H]
THREADING 4048T I M E S [ 4048T]
MAINTENANCE INFORMATION DISPLAY
1-4. Confirming Identification of HKSR-
5804
1.
On the HOME menu, press the DIAG button while
pressing the
[SFT]
(shift) key.
The MAINTENANCE INFORMATION menu
appears.
2.
Press
[F5]
(OPTION INF).
The OPTION INFORMATION menu appears.
3.
Check that “INSTALLED” is displayed for the HKSR-
5804 board.
n
For more information on the maintenance mode, refer to
Section 3 of the VTR Maintenance Manual Volume 1.
Connection cord (with modular plugs)
Cable
clamps
<Top view>
Cable
clamps
Cable
clamps
Cable
clamps
Coaxial cables
