Sony HDW-790, Operation Manual

Page: 156 / 176

156
Menu List
Ap
pend
ix
e
s
1) When Y is selected in the camcorder with an optional HKDW-702, the color signal is output from the connector whose selected output signal is a SD signal.
2) When an optional HKDW-702 is installed, the HD-SDI OUT connector (located on the side of the camcorder) can be used as the VBS/SDI output connector.
3) When either 50i or 25PsF is selected, 105.0 is the factory setting.
4) This item is displayed when an optional HKDW-702 is installed.
5) When either 50i or 25PsF is selected, this item is not displayed.
MAINTENANCE Menu
The following table lists and describes the items in the
MAINTENANCE menu.
When the setting range in the Settings column is
surrounded by parentheses ( ), the setup value is a relative
value. The setting range shown on the menu screen may
differ from what is shown in the manual.
P16 SCENE FILE 1 — — Recalls the scene file saved in the memory of
the camcorder.
2 — —
3 — —
4 — —
5 — —
STANDARD — — Clears all current detail-adjusted settings and
switch settings and returns the settings to the
standard settings saved in the reference file.
SCENE RECALL — — Recalls the scene file from the memory of the
camcorder or the “Memory Stick.”
SCENE STORE — — Stores the scene file in the memory of the
camcorder or the “Memory Stick.”
F.ID 16 characters — Sets the File ID.
No. Page Item Settings Default Description
No. Page Item Settings Default Description
M01 WHITE
SHADING SHADING CH SEL R/G/B/TEST TEST Selects the channel adjusted by shading. If
TEST is selected, the setting is the same as
the setting of OUTPUT SELECT.
OUTPUT SELECT
1) Y/R/G/B Y Selects the output signal from the TEST OUT
connector, the input signal to the viewfinder,
and the output signal from the VBS/SDI
OUT
2)
.
R/G/B WHT H SAW (–99 to 99) 0 Adjusts the H Saw white shading
compensation.
R/G/B WHT H PARA (–99 to 99) 0 Adjusts the H Parabola white shading
compensation.
R/G/B WHT V SAW (–99 to 99) 0 Adjusts the V Saw white shading
compensation.
R/G/B WHT V PARA (–99 to 99) 0 Adjusts the V Parabola white shading
compensation.
WHITE SAW/PARA OFF/ON ON Turns white shading Saw and Parabola
compensation on and off.