77
Usi
n
g
th
e
Me
n
u
(DISPLAY SET)
menu
Display settings of the display and the
viewfinder (MARKER/VF BACKLIGHT/
DISPLAY OUTPUT, etc.)
The default settings are marked with
B
.
The indicators in parentheses appear when
the items are selected.
See page 65 for details on selecting
menu items.
You can display a zebra pattern as a guide
for adjusting brightness.
x
ON/OFF
When you select [ON],
and the
brightness level appear on the screen. The
zebra pattern will not be recorded with the
image. The default setting is [OFF].
x
LEVEL
You can select the brightness level between
70 and 100 or 100+. The default setting is
[70].
z
Tips
• The zebra pattern is a strip pattern displayed
over a part of an image on the screen when the
part is higher than the preset brightness level.
• You can assign an ASSIGN button to work as
[ON/OFF] (p. 43).
x
ON/OFF
When you select [ON],
appears
and you can display an image on the screen
with its outlines enhanced. This function
helps you to adjust the focus. The default
setting is [OFF].
Press the MENU button
t
select
(DISPLAY SET) with the SEL/PUSH
EXEC dial.
ZEBRA
PEAKING
x
COLOR
You can select peaking color from
[WHITE], [RED] and [YELLOW]. The
default setting is [WHITE].
x
LEVEL
You can select a peaking sensitivity from
[HIGH], [MIDDLE] and [LOW]. The
default setting is [MIDDLE].
b
Notes
• The enhanced outlines will not be recorded on
the memory card.
z
Tips
• You can focus more easily using this function in
combination with the expanded focus function
(p. 31).
• You can assign an ASSIGN button to work as
[ON/OFF] (p. 43).
x
ON/OFF
When you select [ON], you can display
markers. The default setting is [OFF].
Markers will not be recorded on the
memory card.
x
CENTER
When you select [ON], you can display a
marker at the center of the screen. The
default setting is [ON].
x
GUIDEFRAME
When you select [ON], you can display
frame markers that help you to check
horizontal and vertical positions of a
subject. The default setting is [OFF].
b
Notes
• Only the time code is output to an external
device via external output jacks when
[MARKER] is set to [ON], even if [DISPLAY
OUTPUT] is set to [ALL OUTPUT].
MARKER
Continued
,
