22
To verify the remaining capacity of the internal hard disk
Note
You can only verify the remaining capacity of the internal hard disk when you use the unit
stand-alone.
1
Make sure that there are no media inserted into the drives of the
unit.
If there are, remove them. See page 17 to remove the “Memory Stick”. See
page 18 to remove the CompactFlash card.
2
Press and hold CANCEL/HDD CAPA.
The four indicators of the unit light for a moment, and then the remaining
capacity of the internal hard disk is displayed as follows.
3
Release CANCEL/HDD CAPA. to resume normal operation.
To turn off the unit
Push and slide the
?/1
(power) switch in the direction of the arrow. The
1
e
(power) indicator turns off when the unit does. The indicator continues
flashing red when the internal battery is recharging.
1
e
CF
Capacity
Lit green Lit green Lit green Lit green 20 GB or more
−
Lit green Lit green Lit green 10 to 20 GB
−
−
Lit green Lit green 5 to 10 GB
−
−
−
Lit green 1 to 5 GB
−
−
−
−
1 GB or less
Summary of Contents for HDPS-M1
Page 46: ......