50
4K 2SI diamond marker
This function is for displaying a test pattern like the following in the
area at the bottom right of the 4K color bar during 4K 2 sample
interleave output. OK is displayed if the connections for Links 1 to 4
are correct, and OK is not displayed if they are incorrect. This
function can be used to check the connections.
HFR channel marker
This function is for displaying a marker in the video area of HD HFR
output.
The number of squares indicates the channel number so you can
easily identify the channel number of a multi-link interface.
Example: Indication for channel 4
AUDIO/INTERCOM menu
Correct connections
When Link 1 and Link 2 have
been swapped
AUDIO/INTERCOM
Page name
Page No.
Item
Set value
Description
<MIC GAIN>
A01
CAM MIC GAIN
Sets the camera microphone gain.
CH1
(---), 20, 30, 40, 50,
60
dB
Set according to the microphone used.
(---):
Displayed when a camera is not connected.
(Display only)
CH2
(---), 20, 30, 40, 50,
60
dB
<AUDIO OUT>
A02
DELAY
0, 5, 11, 16, 21, 27, 32, 37, 43, 48,
53, 59, 64, 69, 75, 80 ms
Sets the camera microphone output phase.
ANALOG OUT
MIC1/2
, AES/EBU
Selects the MIC OUT ANALOG output.
MIC1/2:
Outputs the camera MIC1/2 input from the
MIC OUT connector of the CCU.
AES/EBU:
Outputs the camera AES/EBU input from
the MIC OUT connector of the CCU.
CH1 LEVEL
–20,
0
, +4 dBu
Sets the AUDIO CH1 output level.
ADJUST
–99 to 99
0
CH2 LEVEL
–20,
0
, +4 dBu
Sets the AUDIO CH2 output level.
ADJUST
–99 to 99
0
