89
HKCU-SDI50
HKCU-SFP50
HKCU-SM50
Design and specifications are subject to change without
notice.
Open Source Software Licenses
On the basis of license contracts between Sony and the
software copyright holders, this product uses open software.
To meet the requirements of the software copyright holders,
Sony is obligated to inform you of the content of these
licenses.
For the content of these licenses, see the PDF file in the
“License” folder of the supplied CD-ROM.
General
Power consumption
5 W
Operating
temperature
5 °C to 40 °C (41 °F to 104 °F)
Storage temperature
–20 °C to +60 °C (–4 °F to 140 °F)
Dimensions (w/h/d,
excluding protrusions)
21 × 57 × 230 mm
(
27
/
32
× 2
1
/
4
× 9
1
/
8
inches)
Mass
HIF board: Approx. 150 g (5.3 oz)
Output connectors
HIF board: BNC type (4)
12G-SDI: SMPTE ST2082, 0.8 Vp-p, 75 ohms, 11.880 Gbps/
11.868 Gbps
6G SDI: SMPTE ST2081, 0.8 Vp-p, 75 ohms, 5.940 Gbps/
5.934 Gbps
3G SDI: SMPTE ST424/425 Level-A/B, 0.8 Vp-p, 75 ohms,
2.970 Gbps/2.967 Gbps
HD SDI: SMPTE ST292, 0.8 Vp-p, 75 ohms, 1.485 Gbps/
1.4835 Gbps
Supplied accessories
30-pin cable (2)
2.6×5 (4)
Operating Instructions (1)
General
Power consumption
43 W
Operating
temperature
–10 °C to +40 °C (14 °F to 104 °F)
Storage temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Dimensions (w/h/d,
excluding protrusions)
258 × 116 × 41 mm
(10
1
/
4
× 4
5
/
8
× 1
5
/
8
inches)
Mass
Approx. 0.5 kg (1 lb 1.6 oz)
I/O connectors
Connectors
SFP+, SFP28
Number of lines
2
Signal type
10GBASE-**, 25GBase-** (depending on
SFP+/SFP28 transceiver module)
For information about the supported SFP+
and SFP28 transceiver modules (e.g.
OTM-10GSR1), contact your Sony sales or
service representative.
Supplied accessories
Air divider plate (1)
Rivet (3)
60-pin harness (2)
20-pin harness (1)
Power supply harness (1)
Screws M3×8 (6)
Screws M2.6×5 (2)
Bracket (1)
Cover sheet (2)
Operating Instructions (1)
General
Power consumption
1.2 W
Operating
temperature
–10 °C to +40 °C (14 °F to 104 °F)
Storage temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Dimensions (w/h/d,
excluding protrusions)
66 × 67 × 30 mm
(2
5
/
8
× 2
3
/
4
× 1
3
/
16
inches)
Mass
Approx. 0.1 kg (3.5 oz)
Input/output connectors
ST connectors for single-mode fiber cables (2)
Supplied accessories
SC-LC optical fiber cable (1)
Optical module (1)
Screws M3×8 (1)
Bracket (1)
Cover sheet (1)
Operating Instructions (1)
Notes
• Always verify that the unit is operating properly before
use. SONY WILL NOT BE LIABLE FOR DAMAGES OF
ANY KIND INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO FAILURE OF THIS
UNIT, EITHER DURING THE WARRANTY PERIOD OR
AFTER EXPIRATION OF THE WARRANTY, OR FOR
ANY OTHER REASON WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY
KIND MADE BY USERS OF THIS UNIT OR MADE BY
THIRD PARTIES.
• SONY WILL NOT BE LIABLE FOR THE TERMINATION
OR DISCONTINUATION OF ANY SERVICES RELATED
TO THIS UNIT THAT MAY RESULT DUE TO
CIRCUMSTANCES OF ANY KIND.
SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY
KIND RESULTING FROM A FAILURE TO IMPLEMENT
PROPER SECURITY MEASURES ON TRANSMISSION
DEVICES, UNAVOIDABLE DATA LEAKS RESULTING
FROM TRANSMISSION SPECIFICATIONS, OR
SECURITY PROBLEMS OF ANY KIND.
Depending on the operating environment, unauthorized
third parties on the network may be able to access the unit.
When connecting the unit to the network, be sure to confirm
that the network is protected securely.
