24
<MULTI FORMAT>
S05
SYSTEM
1.001(525)
, 1.000(625)
Selects the operating frequency of the system.
CAMERA FORMAT
When 1.001(525) is selected in
SYSTEM:
1080/59.94P (4K/HDR), 1080/
59.94P,
1080/59.94I
, 1080/
29.97PsF, 1080/23.98PsF, 720/
59.94P, 1080/59.94I (RGB444),
1080/29.97PsF (RGB444), 1080/
23.98PsF (RGB444), 1080/
59.94I(2x), 720/59.94P(2x)
When 1.000(625) is selected in
SYSTEM:
1080/50P (4K/HDR), 1080/50P,
1080/50I
, 1080/25PsF, 1080/
24PsF, 720/50P, 1080/50I
(RGB444), 1080/25PsF (RGB444),
1080/24PsF(RGB444), 1080/
50I(2x), 720/50P(2x)
Selects the system format.
Only 1080/59.94P and 1080/50P are displayed when
using HDCU3170.
The formats available for selection vary depending
on the active format of the connected camera.
BIT DEPTH
10BIT, 12BIT
Sets the RGB4:4:4 output bit length, and changes
the CCU output format.
This can be selected only when CAMERA FORMAT
is set to 1080/59.94I (RGB444), 1080/29.97PsF
(RGB444), 1080/23.98PsF (RGB444), 1080/50I
(RGB444), 1080/25PsF (RGB444), or 1080/24PsF
(RGB444).
Not displayed when using HDCU3170.
CCU VIDEO
CONVERT
DISABLE
, ENABLE
Sets the video converter function.
When ENABLE is selected, set FRAME
SYNCHRONIZER to ON.
Tip:
When CCU VIDEO CONVERT is set to
ENABLE, the video convert function within the CCU
introduces a delay, which is compensated for by
advancing the camera signal.
FRAME CONVERT
DELAY
0.8, 1.2,
1.6
Sets the video delay time for 2-3 Pulldown.
This is enabled only when SYSTEM is 1.001 (525).
Not displayed when using HDCU3170.
HD-SD DELAY
LINE
, FRAME
Sets the phase output for SD signals down-
converted from HD signals.
The delay duration display will be as follows when
CAMERA FORMAT is set to a 1080 format.
When LINE is selected:
90H
When FRAME is selected:
1 frame
The delay duration display will be as follows when
CAMERA FORMAT is set to a 720 format.
When LINE is selected:
120H
When FRAME is selected:
2 frames
SYSTEM CONFIG
Page name
Page No.
Item
Set value
Description
Note