175
Menu List
App
end
ix
Other Items (Nos. T01 to ...)
Items T01, T02, and T04 are reset to their factory default
settings whenever the power is turned off.
BO2
NW MON CTRL
Performs settings for the monitor output.
Sub items
LUT
[off]
Bank-1
Bank-2
Bank-3
Bank-4
Bank-5
Bank-6
Bank-7
Bank-8
Selects one of the eight lookup table (LUT) banks.
Off: Does not use any LUT.
Bank 1 to Bank 8: Uses the selected LUT bank.
COLOR SPACE
[RGB]
YCbCr
Selects the monitor output signal.
RGB: Outputs an RGB 4:4:4 signal.
YCbCr: Outputs a YCbCr 4:2:2 signal.
PRE LUT RANGE
[off]
H
t
F
Specifies whether the monitor output signal is extended
from Head to Full before the LUT.
Off: Does not extend from Head to Full before the LUT.
H
t
F: Extends from Head to Full before the LUT.
POST LUT RANGE
[off]
F
t
H
Specifies whether the monitor output signal is compressed
from Full to Head after the LUT.
Off: Is not compressed from Full to Head after the LUT.
F
t
H: Is compressed from Full to Head after the LUT.
Item number
Item
Setting
Function
T01
AUTO REPEAT
MODE
[off]
on
Selects the repeating operation of PREVIEW in automatic
editing.
off: PREVIEW in automatic editing is not repeated.
on: PREVIEW in automatic editing is repeated. To stop,
press the STOP button.
T02
INTERNAL VIDEO
SIGNAL
GENERATOR (HD)
[off]
COLOR BARS (100%)
COLOR BARS (75%)
SMPTE COLOR BARS
ARIB COLOR BARS
MULTI BURST 1
MULTI BURST 2
10 STEPS
PULSE & BAR
RAMP
BLACK
Selects the test signal output by the signal generator built
into the VTR.
off: The test signal is not generated, and the VTR operates
normally.
all other settings: The test signal is output from the VTR. At
this time it is also possible to record the signal.
T04
INTERNAL AUDIO
SIGNAL
GENERATOR
[off]
silence
1 kHz sine
Selects the operation of audio test signal output.
off: The audio test signal is not output.
silence: The silence signal is output.
1 kHz sine: 1 kHz (In this case, a 1 kHz -20 dB sine wave is
supplied to all audio inputs.)
Item number
Item
Setting
Function
Note
