Sony HDCAM-SR SRW5100 Operation Manual Download Page 83

Page: 83 / 149

4-5 VIDEO Menu

ap
te

r 4

enu

Se
tt

Numerical value:

–127 to +127

Adjustable range:

–30º to +30º

This setting can also be carried out in the VTR SETUP
menu item 742 “CHROMA PHASE (ALL)”.

Adjusting the black output level (HD/SD)

Make this adjustment with the ALT/

[F8]

(BLK LV (ALL))

buttons.

prst:

0.0% (110H)

Numerical value:

–31.0% (0H) to +31.0% (220H)

Adjustable range:

–31.0% to +31.0%

This setting can also be carried out in the VTR SETUP
menu item 743 “BLACK LEVEL (ALL)”.

Adjusting the setup level (COMPOSITE)

Make this adjustment with the ALT/

[F9]

(SETUP LEVEL)

buttons.

prst:

7.5 IRE

Numerical value:

0 to +10.0

Adjustable range:

0 to +10.0 IRE

This setting can also be carried out in the VTR SETUP
menu item 762 “SETUP LEVEL (CST)”.

Summary of Contents for HDCAM-SR SRW5100






















































































































































Search results

Summary of Contents for HDCAM-SR SRW5100

Reviews:

Related manuals for HDCAM-SR SRW5100

Brands by name

Popular brands

Sony HDCAM-SR SRW5100, Operation Manual

Search results

Summary of Contents for HDCAM-SR SRW5100

Reviews:

Related manuals for HDCAM-SR SRW5100

Brands by name

Popular brands