Sony HDC-F950, Operation Manual

Page: 115 / 130

Chapter 4 Adjustments and Settings for Recording
Chapter 4 Adjustments and Settings for Recording
4-21(E)
BATT ALARM page
The current status of each item appears to the right
of the item.
Item Contents
TYPE Shows the input power source.
BEFORE END Shows the ALARM voltage set with the
MAINTENANCE menu when the input
power source is other than AC ADP.
END Shows the SHUTDOWN voltage set
with the MAINTENANCE menu when
the input power source is other than
AC ADP.
3
When the menu operation is completed, set the
DISPLAY switch to ON.
4-6-8 Other Settings
In the OTHERS page of the OPERATION menu, you
can make settings for D5600K, assignable switch,
microphone gain, and VTR S/S switches.
1
Set the DISPLAY switch to MENU.
2
Turn the MENU SEL knob/ENTER button to
display the OTHERS page, and press the MENU
SEL knob/ENTER button.
OTHERS page
The current setting of each item appears to the
right of the item.
Note
The override returns to 0 when you turn the camera
off, then on again.
3
Rotate the MENU SEL knob/ENTER button to
align the arrow marker (
c ) with the item you want
to set, and push the MENU SEL knob/ENTER
button.
The arrow marker (
c
) will change into a “?” mark.
4
Rotate the MENU SEL knob/ENTER button to
change the setting to the desired value, and push
the MENU SEL knob/ENTER button.
The “?” mark will change back to the arrow
marker (
c
), and the new setting will be saved.
5
To set the values for another items, repeat steps
3
and 4 .
6
When the menu operation is completed, set the
DISPLAY switch to ON.
The menu display disappears from the viewfinder
screen, and the current status of the camera appears at
the upper and lower edges of the screen.
4-6-7 Displaying the Power
Voltage
In the BATT ALARM page of the OPERATION
menu, you can display the settings relating to the
operating power.
No setting is made using this page.
1
Set the DISPLAY switch to MENU.
2
Turn the MENU SEL knob/ENTER button to
display the BATT ALARM page, and press the
MENU SEL knob/ENTER button.
<BATT ALARM> 8
BATT
TYPE:
c
AC ADP
BEFORE END: ---
END : ---
<OTHERS> 9
D5600K :
c
OFF
ASSIGNABLE1 : OFF
ASSIGNABLE2 : OFF
MIC1 GAIN : -60dB
MIC2 GAIN : -60dB
CAM VTR S/S: RET2 SW
LENS VTR S/S: RET2 SW
ZOOM DISP : RIGHT