Sony HD-X1, Service Manual

Page: 82 / 118

82
HCD-X1
MIB01 BOARD IC507 CXD9836R (PIXEL RESOLUTION CONVERTER)
Pin No. Pin Name I/O Description
1
VSS - Ground terminal
2
XTCK1 I Terminal for test Fixed at "L" in this set
3
XSM I Terminal for test Fixed at "H" in this set
4
XTST I Terminal for test Fixed at "H" in this set
5
MST I Terminal for test Fixed at "L" in this set
6
SMCK I Terminal for test Fixed at "H" in this set
7 to 9
DC9 to DC7 I
Video signal input from the progressive scan converter
10
VDDI - Power supply terminal (+2.5V) (for core)
11
VSS - Ground terminal
12 to 15
DC6 to DC3 I
Video signal input from the progressive scan converter
16
VDDE - Power supply terminal (+3.3V) (for I/O)
17 to 19
DC2 to DC0 I
Video signal input from the progressive scan converter
20
DY0 I
Video signal input from the progressive scan converter
21
VSS - Ground terminal
22 to 30
DY1 to DY9 I
Video signal input from the progressive scan converter
31
VSS - Ground terminal
32 to 39
DI0 to DI7 I
Video signal input from the progressive scan converter
40
VDDI - Power supply terminal (+2.5V) (for core)
41
VSS - Ground terminal
42, 43
DI8, DI9 I
Video signal input from the progressive scan converter
44
DH I Horizontal sync signal input terminal Not used
45
DV I Vertical sync signal input terminal Not used
46
VDDE - Power supply terminal (+3.3V) (for I/O)
47
F1 I Field flag control signal input terminal Not used
48
ALSB I
IIC slave address setting terminal
Slave address setting: 0 x 28 when ALSB is "0", 0 x 2A when ALSB is "1"
49 SDA I/O Two-way data bus with the HDMI controller
50
SCL I Serial data transfer clock signal input from the HDMI controller
51
VSS - Ground terminal
52
NRST I System reset signal input from the HDMI controller "L": reset
53
TEST0 I Terminal for test Fixed at "L" in this set
54
TEST1 I Terminal for test Fixed at "L" in this set
55
TEST2 I Terminal for test Fixed at "L" in this set
56
TEST3 I Terminal for test Fixed at "L" in this set
57, 58
QB0, QB1 O
Video signal (blue) output terminal Not used
59
OVDDE1 - Power supply terminal (+3.3V) (for I/O)
60
VDDI - Power supply terminal (+2.5V) (for core)
61
VSS - Ground terminal
62 to 69
QB2 to QB9
O Video signal (blue) output to the HDMI panellink cinema transmitter
70
VDDI - Power supply terminal (+2.5V) (for core)
71
VSS - Ground terminal
72, 73
QG0, QG1 O
Video signal (green) output terminal Not used
74, 75
QG2, QG3
O Video signal (green) output to the HDMI panellink cinema transmitter
76
VDDE - Power supply terminal (+3.3V) (for I/O)
77 to 80
OG4 to OG7
O Video signal (green) output to the HDMI panellink cinema transmitter
81
VSS - Ground terminal