![background image](http://html.mh-extra.com/html/sony/hcd-zx9-receiver-cd/hcd-zx9-receiver-cd_operating-instructions-manual_1329795016.webp)
16
US
Notes
• Do not press A
Z
or
Z
B while playing a tape,
otherwise the tape could be damaged.
• The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– When the system is placed near a television.
Tips
• During “
j
”
or Relay Play, the deck stops
automatically after repeating the sequence for five
times.
• If you press
h
or
H
while the system is turned off,
the system turns on automatically and “TAPE A” or
“TAPE B” is selected as a function. Then, the
playback starts if there is tape in the tape deck (One
Touch Play).
• If you press
N
on the remote during “TAPE A”
function and there is no tape in deck A, the system
automatically switches to “TAPE B” function when
there is a tape in deck B. Then, playback will start
and vice versa.
• If you press TAPE on the remote while the system is
turned off, the system turns on automatically and
“TAPE A” or “TAPE B” is selected as a function.
You can record a whole disc into a tape.
You can use TYPE I (normal) tape. The
recording level is adjusted automatically.
1
Load a recordable tape into deck B.
2
Press FUNCTION repeatedly until “CD”
appears in the display (or press CD on
the remote). Load a disc you want to
record.
When you want to record an album of MP3
audio tracks, press PLAY MODE
repeatedly until “ALBM” lights up in the
display and then press ALBUM +/– to
select the album you want.
3
Press CD SYNC.
Deck B stands by for recording.
REC PAUSE/START indicator flashes.
If you want to record on the reverse side,
press
h
(TAPE B).
4
Press DIRECTION repeatedly to select
“
g
” to record on one side. Select
“
j
” (or “RELAY”) to record on both
sides.
5
Press REC PAUSE/START.
Recording starts.
To stop recording
Press
x
(TAPE B).
Tape – Recording
Recording your favorite
tracks on a disc into a
tape
— CD Synchro Recording