![background image](http://html.mh-extra.com/html/sony/hcd-xgr88/hcd-xgr88_service-manual_1329778003.webp)
3
HCD-XGR88
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostatic
break-down because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pick-
up block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
LASER DIODE AND FOCUS SEARCH OPERATION
CHECK
Carry out the “S curve check” in “CD section adjustment” and
check that the S curve waveforms is output three times.
• MODEL IDENTIFICATION
– Rear Panel –
MODEL
E2 model
E51 model
PARTS No.
4-244-927-4
s
4-244-927-5
s
•
Abbreviation
E2
: Central and South America
E51
: Chilean and Peruvian
PART No.
Summary of Contents for HCD-XGR88
Page 77: ...77 HCD XGR88 MEMO ...