Sony HCD-VP700, Service Manual

Page: 14 / 92

14
HCD-VP700
[CD Ship Mode (No Memory Clear)]
• This mode moves the position to the position durable to vibra-
tion Use this mode when returning the set to the customer after
repair.
Procedure:
1. Press
`/1
button to turn the set ON.
2. Press three ENTER , DISK 1 button and CD button
simultaneously.
3. After the “STANBY” display blinks six times, a message
“LOCK” is displayed on the fluorescent indicator rube, and the
CD ship mode is set.
[CD Ship Mode (Memory Clear)]
• This mode moves the pickup to the position durable to vibra-
tion. Use this mode when returning the set to the customer after
repair.
Procedure:
1. Press
`/1
button to turn the set ON.
2. Press three buttons CD and
`/1
button simultaneously.
3. After the “STANDBY” display blinks six times, a message
“LOCK” is displayed on the fluorescent indicator tube, and the
CD ship mode is set.
[CD Service Mode]
• This mode can run the CD sled motor freely. Use this mode, for
instance, when cleaning the pickup.
Procedure:
1. Press
`/1
button to turn the set ON.
2. Select the function “CD”.
3. Press three buttons ENTER , DISC 1 , and
x simultaneously.
4. The CD service mode is selected.
5. With the CD in stop status, press
M button to move the
pickup to outside track, or press m button to inside track.
6. To exit from this mode, perform as follows:
1) Move the pickup to the most inside track.
2) Press
`/1
button to turn the set OFF.
Note:
• Always move the pickup to most inside track when exiting from
this mode. Otherwise, a disc will not be unloaded.
• Do not run the sled motor excessively, otherwise the gear can
be chipped.