![background image](http://html.mh-extra.com/html/sony/hcd-mg510av/hcd-mg510av_service-manual_420819004.webp)
4
HCD-MG510AV
SECTION 1
SERVICING NOTES
CD-TEXT TEST DISC
This unit is able to display the test data (character information)
written in the CD on its fluorescent indicator tube.
The CD-TEXT TEST DISC (TGCS-313:4-989-366-01) is used
for checking the display.
To check, perform the following procedure.
Checking Method:
1. Press the
I/
1
button to turn the power on, set the disc to the
disc table with the “test disc” label facing up, and chuck the
disc.
2. Press the
[CD]
button to set CD function, and press the
n N
button
to playback the disc.
3. The following will be displayed on the liquid crystal display.
Display : 1KHZ/0DB/L R
4. Pressing the
[-- ]
or
[ +]
button, select the track. The text
data of each track will be displayed.
For details of the displayed contents for each track, refer to “Table
1: CD-TEXT TEST DISC TEXT Data Contents”.
Restrictions in CD-TEXT Display
In this unit, some special characters will not be displayed prop-
erly. These will be displayed as a space or a character resembling
it.
Table 1: CD-TEXT TEST DISC TEXT Data Contents
(TRACKS No. 1 to 20:Normal Characters)
1
1kHz/0dB/L&R
2
20Hz/0dB/L&R
3
40Hz/0dB/L&R
4
100Hz/0dB/L&R
5
200Hz/0dB/L&R
6
500Hz/0dB/L&R
7
1kHz/0dB/L&R
8
5kHz/0dB/L&R
9
7kHz/0dB/L&R
10
10kHz/0dB/L&R
11
16kHz/0dB/L&R
12
18kHz/0dB/L&R
13
20kHz/0dB/L&R
14
1kHz/0dB/L&R
15
1kHz/–1dB/L&R
16
1kHz/–3dB/L&R
17
1kHz/–6dB/L&R
18
1kHz/–10dB/L&R
19
1kHz/–20dB/L&R
20
1kHz/–60dB/L&R
TRACK
No.
Displayed Contents
Note:
Track No. 21 to 99 are not displayed.
.
>
CLEANING OBJECTIVE LENS OF OPTICAL PICK-UP
• In cleaning the objective lens of optical pick-up, be sure the
following below.
(Figure A)
Note 1.
In cleaning the lens, do not apply an excessive force.
As the optical pick-up is vulnerable, application of excessive
force could damage the lens holder.
Note 2.
In cleaning, do not use a cleaner other than exclusive cleaning
liquid (KK-91 or isopropyl alcohol).
Note 3.
Wipe the objective lens spirally from center toward outside. (See
Figure A)
2
Remove the
magnet assy.
1
Open the torsion holder
(magnet) in direction of
arrow
A
.
A
optical pick-up
bracket (top 60) hole
3
Put a cotton bud into
the hole on the bracket
(top 60) and clean the
OP lens.
Summary of Contents for HCD-MG510AV
Page 16: ...16 HCD MG510AV MEMO ...