O
p
ti
on
al
C
o
mp
on
en
ts
27
US
To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
A
TV (AUDIO IN) L/R jacks
Use audio cords (not supplied) to connect the
audio output jacks of a TV to these jacks. You
can then output audio signal through this system.
B
VIDEO/MD (AUDIO IN) L/R
jacks
Use audio cords (not supplied) to connect the
audio output jacks of the optional component
(such as VCR or MD deck) to these jacks. You
can then output audio through this system.
C
D-LIGHT SYNC OUT jack
Use the D-LIGHT SYNC controller to connect
to this jack. You need to connect the D-LIGHT
SYNC controller to the lighting device* (not
supplied). The lighting device will react
according to control signals transmitted by the
D-LIGHT SYNC controller upon receiving
music source from the system. For details on the
use of D-LIGHT SYNC controller and lighting
device, refer to the respective operating
instructions supplied with the respective device.
* Refer to the D-LIGHT SYNC controller
operating instruction for the recommended
lighting device.
Note
The lighting effect may be different depending on the
connected lighting device or the type of music being
played back.
Optional Components
Hooking up optional components
TV
D-LIGHT SYNC
controller (DLS-1)
From the audio output
jacks of the connected
component
From the audio output
jacks of the TV
VCR, MD deck or
DVD player
D-LIGHT SYNC
controller cord
Summary of Contents for HCD-LX10000 (MHC-LX10000)
Page 39: ......
