![background image](http://html.mh-extra.com/html/sony/hcd-gzr333i/hcd-gzr333i_operating-instructions-manual_420771108.webp)
MHC-GZR333i/LBT-LCD77Di.GB.4-181-572-11(1)
10
GB
The DivX video file does not conform
to a DivX Certified profile.
The MPEG4 video file has the
extension “.mp4” or “.m4v”, but does
not conform to MPEG4 Simple Profile.
The disc title, CD-TEXT and DVD-TEXT
characters do not appear properly.
The disc is recorded in format other
than ISO 9660 Level 1, Level 2 or Joliet
(expansion).
The character code that can be
displayed by this system are as follows:
Upper cases (A to Z)
Numbers (0 to 9)
Symbols (< > * +, ? / [ ] \ _)
Other characters appear as “_.”
The surround effect is difficult to hear
when you are playing a Dolby Digital
or MPEG audio sound track.
Make sure the sound field is set
properly (page 89).
Check the speaker connection
(page 23).
Depending on the DVD VIDEO, the
output signal may not be the entire 5.1
channel. It may be monaural or stereo,
even if the sound track is recorded in
Dolby Digital or MPEG audio format.
The sound loses stereo effect when
you play back a DVD VIDEO, VIDEO
CD, AUDIO CD, MP file or video file.
Unplug the microphone or press
KARAOKE MODE repeatedly until
“KARAOKE MODE: OFF” appears in
the display.
Make sure the system is connected
properly.
Check the speaker connection
(page 23).
iPod
“Overload occurred. Turn off the
system and remove USB device.”
appears.
A problem has been detected with
the level of electrical current from the
iPod connector. Turn off the system
and remove the iPod from the iPod
connector. Make sure there is no
problem with the iPod. If this display
pattern persists, contact your nearest
Sony dealer.
There is no sound.
Make sure the iPod is connected
securely.
Make sure the iPod is updated with the
latest software. If not, update the iPod
before using with the system.
Make sure the iPod is playing music.
Adjust the volume.
It may take time to start playback
depending on the contents.
The sound is distorted.
Make sure the iPod is connected
securely.
Turn down the volume.
Set the “EQ” setting of the iPod to
“Off” or “Flat.”