![background image](http://html.mh-extra.com/html/sony/hcd-gx255/hcd-gx255_service-manual_420762108.webp)
4
HCD-GX255/RG170/RG470
Checking Location:
+
–
CD board
TP (RFACI)
TP (VC)
oscilloscope
(DC range)
Procedure :
1. Connect oscilloscope to TP (RFACI) and TP (VC) on the CD
board.
2. Press the
I/
1
button to turn the power ON, and press
the
Z
button to open the CD disc table.
3. Set disc (YEDS-18) on the tray and press the
N
button to
playback.
4. Confirm that oscilloscope waveform is as shown in the figure
below. (eye pattern)
A good eye pattern means that the diamond shape (
◊
) in the
center of the waveform can be clearly distinguished.
VOLT/DIV: 200 mV
TIME/DIV: 500 ns
level:
0.9
±
0.4 Vp-p
TP
(VC)
TP
(RFACI)
IC201
– CD Board (Conductor Side) –
2.
ELECTRICAL ADJUSTMENT
CD SECTION
Note:
1.
CD Block is basically constructed to operate without adjustment.
2.
Use YEDS-18 disc (3-702-101-01) unless otherwise indicated.
3.
Use an oscilloscope with more than 10 M
Ω
impedance.
4.
Clean the object lens by an applicator with neutral detergent when the
signal level is low than specified value with the following checks.
5.
Check the focus bias check when optical pick-up block is replaced.
FOCUS BIAS CHECK
Summary of Contents for HCD-GX255
Page 104: ...104 HCD GX255 RG170 RG470 MEMO ...
Page 137: ...33 HCD GX255 RG170 RG470 MEMO ...