16
HCD-GX20
[MC Test Mode]
• This mode is used to test the function of the equalizer.
Procedure:
1. Press
?
/
1
button to turn the set ON.
2. To enter the test mode, press the three buttons
x
, GAME EQ
and DISC 3 simultaneously.
3. Press the MOVIE EQ button.
The function of the equalizer is set to “MIN”.
4. Press the MUSIC EQ button.
The function of the equalizer is set to “MAX”.
5. Press the P.FILE button.
The function of the equalizer is set to “FLAT”.
6. To exit from this mode, press
?
/
1
button to turn the set OFF.
[CD Ship Mode (No Memory Clear) ]
• This mode moves the pickup to the position durable to vibra-
tion. Use this mode when returning the set to the customer after
repair.
Procedure:
1. Press
?
/
1
button to turn the set ON.
2. Select the function “CD”.
3. Press
?
/
1
button to turn the set OFF.
4. Press CD button and
?
/
1
button simultaneously.
5. The "STANDBY" display blinks instantaneously, and the CD
ship mode is set.
[GC Test Mode]
• All fluorecent segments and LEDs are tested.
• Keyboard check.
Procedure:
1. Press
?
/
1
button to turn the set ON.
2. To enter the test mode, press the three buttons
x
, GAME EQ
and DISC 2 simultaneously.
3. All segments and LEDs (without STANDBY LED) are turned
on.
4. Press GAME EQ and DISC 2 buttons simultaneously, and the
key check mode is activated.
5. The message “KEY 0 0 0 0” is displayed.
Each time a button is pressed, the key code number is displayed.
6. Press GAME EQ and DISC 2 buttons simultaneously, and the
key count mode is activated.
7. The message “KEYCNT 0 1” is displayed.
Each time a button is pressed, “KEYCNT 0 1” value increased.
However, once a button is pressed, it is no longer taken into
account.
8. Press GAME EQ and DISC 2 buttons simultaneously, and the
head phone detect mode is activated.
9. The message “H_P OFF” is displayed when a headphone jack
is not inserted.
“H_P ON ” is displayed when a headphone jack is inserted.
10. Press GAME EQ and DISC 2 buttons simultaneously, and the
volume control detect mode is activated.
11. The message “VOLUME FLAT” is displayed.
“VOLUME UP” is displayed if rotating VOLUME knob
clockwise, or “VOLUME DOWN” is displayed if rotating
counterclockwise.
12. To exit from the GC test mode after the volume control detect
mode, press GAME EQ and DISC 2 buttons simultaneously.
[Version and Destination Display Mode]
• The version or destination is displayed.
Procedure:
1. Press
?
/
1
button to turn the set ON.
2. To enter the test mode, press the three buttons
x
, GAME EQ
and MOVIE EQ simultaneously.
3. The destination is displayed.
4. Press STOP and GROOVE buttons simultaneously.
5. The version is displayed.
6. To exit from this mode, press
button to turn the set OFF.
• This mode can run the CD sled motor freely. Use this mode, for
instance, when cleaning the pickup.
2. Select the function “CD”.
3. To enter the test mode, press three buttons
x
, GAME EQ ,
and OPEN/CLOSE simultaneously.
4. The CD service mode is selected.
5. With the CD in stop status, press
>
button to move the pickup
to outside track, or press
.
button to inside track.
6. To exit from this mode, perform as follows:
1) Move the pickup to the most inside track.
2) Press
?
/
1
button to turn the set OFF.
Note:
• Always move the pickup to most inside track when exiting from
this mode. Otherwise, a disc will not be unloaded.
• Do not run the sled motor excessively, otherwise the gear can be
chipped.
+
–
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
