Sony HCD-GTZ4i - Compact Disc Receiver Component, Operating Instructions Manual

Page: 46 / 56

46 GB
USB device
DATA ERROR:
You tried to play a file
that is not playable.
DEVICE ERROR:
The USB device
could not be recognized or an unknown
device is connected (page 42).
DEVICE FULL:
The memory of the USB
device is full.
FATAL ERROR:
The USB device was
removed during transferring or erase
operation, and may have been damaged.
FOLDER FULL:
You cannot transfer
onto the USB device because the
number of folders have reached its
maximum.
NO DEVICE:
The USB device is not
connected.
NO MEMORY:
External device is not
inserted in mobile phone.
NO STEP:
All of the programmed steps
have been erased.
NO TRACK:
No playable file is loaded
in the system.
NOT IN USE:
You tried to perform a
specific operation under conditions
where that operation is prohibited.
NOT SUPPORTED:
An unsupported
USB device is connected, or the USB
device is connected to this system
through a hub.
OVER CURRENT:
An over current was
detected.
PROTECTED:
The USB device is write-
protected.
PUSH STOP:
You tried to perform an
operation that can be performed only
when the system is stopped.
READING:
The system is reading
information of the USB device. Some
buttons are not available.
REC ERROR:
Transferring did not start,
stopped partway, or otherwise could not
be performed (page 41).
STEP FULL:
You tried to program more
than 25 steps.
TRACK FULL:
You cannot transfer onto
the USB device because the number of
files have reached its maximum.