![background image](http://html.mh-extra.com/html/sony/hcd-gtx88/hcd-gtx88_service-manual_420754025.webp)
25
HCD-GTX88
[CD ERROR CODE MODE]
• Display the CD error code when an error occurred.
Procedure:
1. Press
x
button,
[ENTER]
button and
[DISC 1]
button
simultaneously to enter the error code display mode.
2. The fluorescent indicator tube display the number of total error.
3. Each time
m
button and
M
button are turned, display
change as below.
%%
: The process when trouble occurs
01
: Process ejecting DISC
02
: Process waiting for inserting DISC
03
: Process sending request to insert a disc to upper
layer.
04
: Process sending request to eject a disc to upper
layer.
05
: Process pulling a DISC in.
06
: Chucking process
07
: Re-chucking process
08
: Process cancelling chucking
&&
: The operation when trouble occurs
00
: Waiting for operation.
10/11/12/13: During eject operation
20
: While pulling a disc in
30
: While cancelling chucking
40/41/42/43: During eject operation due to error.
0000 : Not used (Value is fixed to 0000).
• Display of BD error. It is shown with “D” and 11 digits
number.
DISPLAY OF
TOTAL ERROR
DISPLAY OF
MECHANICAL
ERRORS
BUTTON
M
m
BUTTON
DISPLAY OF
NO DISC
ERRORS
BUTTON
M
m
BUTTON
M
M
M
M
4. To clear the error record, operate the cold reset. (Refer to the
“MC COLD RESET”.)
5. To release from this mode, press the
?
/
1
button or disconnect
the power OFF.
• Display of total error
Em** : The number of times for CDM (mechanical) errors.
Ed** : The number of times for BD error (after chucking the
disc.).
• Display of CDM (mechanical) error. It is show with “M” and
11 digit number.
Em**Ed**
M*$$%%&&0–
000
M*
: The number of history error for mechanical. (“0” is
latest one) (Turn
>
button to display next error.)
$$
: Mechanical errors occur in the operation.
FF
: Mechanical error during normal operation.
Other: Mechanical error during initializing operation.
D*$$%%&&#–
#00
D*
: The number of error history (“0” is latest one)
(Press
>
button to display next error.)
$$
: The detail of trouble
01
: Can not focus
02
: GFS error
03
: Start-up time over
04
: Continuously out of focus
05
: Q code is not input for certain time
06
: Tracking on is impossible
07
: Blank disc
%%
: The process when trouble occurs
01
: While SHIP process is performed
02
: While POWER OFF is processed
03
: While INITIALIZE (POWER ON) is processed.
04
: While oscillation stops
05
: From stopping oscillation to start oscillation
06
: During stop
07
: During STOP operation
08
: While start-up is processed
09
: While TOC reading is processed
0a
: During search operation
0b
: During PLAY operation
0c
: During pause operation
0d
: During PLAY manual search operation
0e
: During PAUSE manual search operation
&&
: Processing operation when trouble occurs
Show each STEP mentioned in %% digits.
##
: Disc speed when trouble occurs.
01
: x1 speed
02
: x2 speed (for models which support x2 speed)
04
: x4 speed
00
: Not used (value is fixed to 00).
Summary of Contents for HCD-GTX88
Page 103: ...103 HCD GTX88 MEMO ...