26
HCD-GTX777/GTX787/GTX888
[CD REPEAT 5 LIMIT OFF MODE]
• The number of repeat for CD playback is 5 times when the re-
peat mode is “REPEAT ALL”. This mode enables CD to repeat
playback for limitless times.
Procedure:
1. Press
?
/
1
button to turn on the system.
2. Select
CD
function.
3. Press
[EQ BAND/MEMORY]
button,
[CD]
button and
[DISC 1]
button simultaneously to enter the CD repeat 5 limit off mode
and the fl uorescent indicator tube displays “LIMIT OFF”.
• To release from this mode, operate the cold reset.
(Refer to the “MC COLD RESET”.)
[CD SHIP MODE (WITH MEMORY CLEAR)]
• This mode moves the optical pick-up to the position durable to
vibration and clears all data including preset data stored in the
RAM to initial conditions. Use this mode when returning the set
to the customer after repair.
Procedure:
1. Press
?
/
1
button to turn on the system.
2. Select
CD
function.
3. Press
x
button,
[SOUND FLASH]
button and
?
/
1
button
simultaneously. The system will turn off automatically.
4. After the “STANDBY” blinking display fi nishes, a message
“MECHA LOCK” is displayed on the fl uorescent indicator tube
and the CD ship mode is set.
5. The Memory is clear after AC Power OFF.
[CD SHIP MODE (WITHOUT MEMORY CLEAR)]
• This mode moves the optical pick-up to the position durable to
vibration. Use this mode when returning the set to the customer
after repair.
Procedure:
1. Press
?
/
1
button to turn on the system.
2. Select
CD
function.
3. Press
[CD]
button and
?
/
1
button simultaneously. The system
will turn off automatically.
4. After the “STANDBY” blinking display fi nishes, a message
“MECHA LOCK” is displayed on the fl uorescent indicator tube
and the CD ship mode is set.
[CD TRAY LOCK MODE]
• This mode let you lock the disc tray. When this mode is activated,
the disc tray will not open when
[OPEN/CLOSE]
button or
[DISC
SKIP/EX-CHANGE]
button is pressed. The message “LOCKED”
will be displayed on the fl uorescent indicator tube.
Procedure:
1. Press
?
/
1
button to turn on the system.
2. Select
CD
function.
3. Press
x
button,
[OPEN/CLOSE]
button simultaneously and
hold down until “LOCKED” or “UNLOCKED” displayed on
the fl uorescent indicator tube (around 5 seconds).
[TCM OFFLINE MODE]
• This mode is used to prevent the system from turning off automati-
cally when TCM is not connected. Therefore, measurements can
be done even when TCM is not connected during production.
Procedure:
1. When the system is turned off, press
[EQ BAND/MEMORY]
button,
[TAPE]
button and
?
/
1
button simultaneously. The
system will turn on automatically.
2. The message “TCM OFFLINE” will be displayed on the fl uo-
rescent indicator tube.
[VACS DISPLAY]
• This mode is used to check the VACS level.
Procedure:
1. Press
?
/
1
button to turn on the system.
2. Press
x
button,
[CHORUS]
button and
[DISC SKIP/EX-
CHANGE]
button simultaneously.
3. The VACS Level Display, the fl uorescent indicator tube displays
“VATB F APC”. “V” represent VACS, A represent VACS level
which is triggered by signal level, “T” represent Thermal VACS
NEO, B represent VACS level which is triggered by temperature,
“F” represent FAN is triggered by software to turn in to high
speed, “AP” represent APVACS (Abuse Protection VACS) and
“C” represent APVACS level which is triggered.
Summary of Contents for HCD-GTX777
Page 107: ...MEMO 107 HCD GTX888 GTX777 GTX787 ...
