70
HCD-GTX66/GTX77
Pin No.
Pin Name
I/O
Pin Description
49
LMR
O
CD mechanism loading motor control signal output
50
STBY RELAY
O
Main power on/off control signal output “H”: power on
51
ATRIG
O
Deck A side trigger plunger drive signal output “H”: plunger on
52
A HALF
I
Deck A cassette detection signal input “H”: cassette detected
53
CAPM+
O
Capstan motor drive signal output
54
B TRIG
O
Deck B side trigger plunger drive signal output “H”: plunger on
55
REC BIAS
O
Recording bias on/off control signal output “H”: bias on
56
TC RELAY
O
Recording/playback selection signal output “H”: recording, “L”: playback
57
PB A/B
O
Deck A/B playback selection signal output “H”: Deck A, “L”: Deck B
58
ALC
O
Automatic limiter control signal output “H”: limiter ON
59
REC MUTE
O
Recording muting on/off control signal output “L”: muting on
60
TC MUTE
O
Tape playback muting on/off control signal output “H”: muting on
61
UNDER VOLTAGE DET
I
Under-voltage protection detection signal input “H”: under-voltage detected
62
VCC
—
Power supply pin (+3.3 V)
63
OVER VOLTAGE DET
I
Over-voltage protection detection signal input “L”: over-voltage detected
64
VSS
—
Ground pin
65
CD USB MUTE
O
CD and USB analog muting on/off control signal output “L”: muting on
66
LINE MUTE
O
Line muting on/off control signal output “L”: muting on
67
STK MUTE
O
Power amplifier and sub woofer amplifier on/off control signal output
“H”: amplifier on
68
HP MUTE
O
Headphone muting on/off control signal output “L”: muting on
69
PROTECTOR
I
Speaker protect detection signal input from speaker protect circuit “L”: protector on
70
FRONT RELAY
O
Relay drive signal output for the front speakers “H”: relay on
71
LINK RELAY
O
Surround speaker mode control signal output “H”: link, ”L”: matrix surround 1/2
Not used in this set.
72
SW SPK RELAY
O
Relay drive signal output for the passive sub woofer output “H”: relay on
Not used in this set.
73
DISPLAY KEY
I
DISPLAY key press detection signal input (Interrupt input)
74
POWER KEY
I
POWER key press detection signal input (Interrupt input)
75
Z GROOVE FREQ
O
Selector port to turn the Z-groove frequency response circuity
76
NO USE
I
Not used in this set. (Connected to ground.)
77
CTRL 3
O
Effector circuity mode control 3 signal output “H”: Chorus/Effector Off,
“L”: Flanger/Delay.
78
CTRL 1
O
Effector circuity mode control 1 signal output “H”: Delay/Effector Off,
“H”: Flanger/Chorus.
O
Serial data signal output to 4-ch volume IC Not used in this set.
O
Serial data transfer clock signal output to 4-ch volume IC Not used in this set.
O
Serial data signal output to audio signal processor
O
Serial data transfer clock signal output to audio signal processor
I
Not used in this set. (Connected to ground.)
O
PLL chip enable signal output to the tuner unit
I
PLL serial data signal input from the tuner unit
O
PLL serial data transfer clock signal output to the tuner unit
O
PLL serial data signal output to the tuner unit
88
FAN HI SPEED
O
Fan high speed control signal output for Themal VACS “L”: Fan high speed on.
89
A SHUT
I
Shut off detection signal input from deck A side reel pulse detector (A/D input)
90
B SHUT
I
Shut off detection signal input from deck A side reel pulse detector (A/D input)
91
B HALF
I
Deck B cassette detection, forward side recording tab detection and reverse side
recording tab detection signal input (A/D input)
92
MODEL IN
I
Model setting pin (A/D input)
93
DEST IN
I
Destination setting pin (A/D input)
94
THERMA VACS
I
Temperature detection signal input from thermistor (A/D input)
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299