HCD-GPX555/GPX888
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2014.02
New
1.1
2014.10
Add R1723 (GPX555) in DAMP board.
Change of DAMP Board (Suf
fi
x 22).
Change P/N of C1188, C1193, C1194, C1213, C1214, C1221, C1293, C1294 and C1300 in DAMP board.
Change P/N of C1265, C1270 and C1271 (GPX888) in DAMP board.
Change P/N of CN101, CN301, CN451 and CN503 in MB board.
Change P/N of CN501 and CN502 (GPX555) in MB board.
Change P/N of CN504, CN505 and CN506 (GPX888) in MB board.
Change P/N of CN1001 in DAMP board.
Change P/N of CN3000 in TUNER board.
Change P/N of REGULATOR, SWITCHING (3H401W) (GPX555: EXCEPT US/GPX888)
in page 69 and 89.
Change P/N and description of C023 in MB board.
Change P/N and description of IC306 in MB board.
Change sentence for CLASS 1 LASER product in page 2.
Delete Q011, Q012, Q013, Q014, Q017, R064, R065, R066, R067, R069, R070, R074 and R075
in MB board.
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF
fi
le search function to
fi
nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note:
If you still see the original page, press the [Enter] key again.
